महाराष्ट्र अभियंता सेवा (स्थापत्य) गट अ २०१३ पूर्व परीक्षा

Using the following data 

by the simpson's 1/3 rule,the area is 710sq.feet.What is the value of y?

(a) y=6.5

(b) y=6

(c) y=7.5

(d) y=7

Answer Options: 

(a) -1

(b) 1

(c) zero

(d) 2

Answer Options :

The particular integral of (D² +6D+5)y=4 e^-x is equal to ?

(a) 4 e^-x

(b) x e^x

(c) x e^-x

(d) 4 e^x

Answer Options : 

If the scalar field is equal to zero.What is the value of k?

(a) 0,28

(b) 28,0

(c) 

(d) 28, -28

Answer Options :

Whether the row vectors of the matrix are linearly independent or

dependent :

What is the positive root of x⁴ – x= 10 by Newton-Raphson method ?

If 

Ratio of the maximum bending stress in the flange to that in the web of an I section at any distance along the length of a beam is always :

Where does maximum shear stress occur in a rectangular shaft subjected to torsion ?

A simply supported beam of span 'L' supports a concentrated load 'W' at mid-span.If the cross-section of beam is an I-Section, then the length of elastic-plastic zone of the plastic hinge will be :

What is the greatest eccentricity which a load ‘W' can have without producing tension on the cross section of a short column of external diameter 'D' and internal diameter 'd' ?

In LSM a balance beam section is defined as one in which :

As per IS : 800-2007., A bolt required to resist both design shear force (Vsd) and design tensile force (Tb) at the same time shall satisfy ________.

What is the strain energy stored in a rod of length 'L' and axial rigidity AE due to an axial force 'P' ?

Match List-I (Type of structure) with List-II (statical indeterminancy) and select the correct answer using the codes given below.

What is the maximum admissible slenderness ratio of steel column subjected to dead and live load only ?

Which allowable stress governs the permissible bending capacity of a structural section ?

If a circular shaft is subjected to a torque 'T' and bending moment 'M', the ratio of maximum bending stress to maximum shear stress is ________.

What does a parabolic cable subjected to a uniformly distributed vertical load over the entire span, develop ?