महाराष्ट्र अभियंता सेवा (स्थापत्य) मुख्य परीक्षा २०१५ पेपर १

Which of the following is not a test for measuring workability of concrete ?

The stone whose crushing strength is maximum, is :

As per the Building Byelaws, how much should be the marginal distance that is to be left in the front? 

Generally at what rate should slip form be lifted ? 

What is a Mullion in a window shutter ? 

How much is the covering capacity of cement paint ?

As per IS specifications, the heat of hydration of low-heat portland cement for 28 days is :

Which of the following is not a principle of ________ planning ?

To what, is Ease related in concrete technology ?

What does not fit into the classification of pile based on function ?

Acceptable noise level in dB for auditorium is :

Cavity or hollow space in a wall is provided for : 

(a) Prevention of dampness

(b) Heat insulation

(c) Sound insulation

(d) Efflorescence

Answer options :

If a solid shaft is subjected to a torque (T) at its end such that maximum shear stress does not exceed f_s, the diameter of the shaft will be :

Maximum deflection of a cantilever due to pure moment 'M' at its free end, is :

If the load on a column is increased to a value that on its removal the deflection remains, the load is known as :

Magnitude of shear stress induced in a shaft due to applied torque varies from :

The ratio of the flexural strengths of two beams of square cross section, the first beam being placed with its top and bottom sides horizontally and second beam being placed with one diagonal horizontally, is :

In an experiment it is found that the bulk modulus of a material is equal to its shear modulus then the Poisson's ratio is :

The beam AC simply supported at A and at C is pinned to a cantilever beam CD as shown in figure. Both beams have identical flexural rigidities EI. The vertical load of 8 KN acts at point B. The deflection of point B is : 

What is true if the areas of cross-section of square and circular beams, subjected to equal bending moments are the same ?